Description
- Suits wheels 13″-17″, with tyre width 175mm to 215mm, suitable for cars and caravans
- Can be used without removing the wheel trim
- A highly visible deterrent that is simple to use and can be fitted in seconds (once initial size set)
- Two security plate settings for different tyre widths
- Fitted with a rubber pad to prevent wheel damage
- Security plate prevents access to wheel nuts
- High security, pick resistant lock, dust, water and corrosion proof
- Folds for easy storage
- Supplied with two keys
Note
Maximum width includes protruding wheel hubs & trims. Make sure there is at least 50mm clearance between the tyre and the body work of the vehicle.
Instructions
Step 1.
Position the arms of the clamp to their maximum open position (in the direction of the arrows shown). Loosely fit the main wheel clamp security plate behind the clamp arms. Position the clamp so the stand rests on the ground. Make sure both tyre arms are tight against the tyre
Step 2.
Insert the locking arm through the locking plate (in the direction of the arrow) selecting the hole which gives it the most secure fir to the wheel (this will depend on the tyre width). Push the arm until a tight fit around the wheel is achieved.
Step 3.
With the wheel clamp in position, lock into place using the key. To remove the clamp, unlock with the key, then reverse the process.
